Library

Media

Darkroom Printing

One negative can yield several different prints. Start with a frame you know well and use small strips of photographic paper to decide how light or dark you want the finished picture to be.

photography
Paper-cutting illustration
Hobby Portal illustration

Start with one negative

An enlarger projects light through a developed film negative onto photographic paper. The face you focus on, the edges you crop away and the detail you keep in a dark coat are all decisions you can make at the enlarger. If you enjoy comparing two versions of a picture, a beginner printing session gives you a chance to do that with your hands.

Look for an introductory black-and-white printing session at a community darkroom, arts centre or camera club. Ask whether the tutor supplies a practice negative or has a carrier that fits your film. An already developed negative lets you spend the session learning to print.

What to check before paying for bench time
ItemWhat to ask
Enlarger and dry benchDoes the booking include a negative carrier, lens, timer and easel to hold the paper flat? Check that the enlarger accepts your negative size.
Paper and chemistryAsk which black-and-white resin-coated paper the tutor uses, how many sheets are included and whether developer, stop bath and fixer are covered. Budget paper for tests as well as finished prints.
Session costsAsk for the combined cost of induction, bench hire and consumables. Prices and membership arrangements vary by venue. Check whether washing, drying and cleanup fit within the booking.
Space at homeA home setup needs a light-tight, ventilated room, a dry enlarger bench, a separate wet area for trays, and somewhere to wash and dry prints. A shared bench lets you try the process before buying an enlarger.

Make a test strip you can read

  1. With the paper box closed, project the negative onto the easel. Set the print size, choose the crop and focus on a detail you can recognise, such as an eyelash or the lettering on a sign.
  2. Under a safelight suitable for your paper, place a small strip over the part of the picture you care about most. Expose it, then try fresh strips in that same position for different times. Keep the lens aperture and contrast setting fixed. Note the time for each strip and close the paper box.
  3. Develop, stop, fix and wash the strips using the instructions for your paper and chemistry. Compare them in ordinary light after fixing. On a portrait, look for the exposure that keeps both the shape of the cheek and the texture in its shadow. If two strips bracket the result you want, try a time between them.
  4. Use the chosen exposure on a full sheet. Process, wash and dry the print. Keep it with the negative number, enlargement size, aperture, exposure time and contrast setting so you can make it again.

Walk through the room with the lights on

Before opening the paper, locate the trays, wash station and exit. Try reaching the enlarger controls and moving an empty pair of tongs between stations. If low light, standing or reaching is difficult, ask about a seated bench, tactile tray labels, an audible timer or a printing partner. A rehearsal in room light lets you find a workable position before the timed steps begin.

Work with ventilation, keep wet hands away from electrical controls and use a separate pair of tongs for each bath. Follow the product safety sheets for handling and protective equipment. At a shared darkroom, ask where spent fixer is collected. For home use, check local photographic chemical disposal arrangements before the first session.

Frequently Asked Questions

Why is the full print darker than I expected?

Check the timer, aperture, contrast setting and enlarger height against your test notes. If you changed the print size after testing, refocus and make a fresh strip at the new size. Give the paper its full recommended development time so exposure comparisons stay meaningful.

Why does the white border look grey?

Process a fresh, unexposed scrap from the same box in complete darkness and compare its white with the border. If the scrap stays white, ask the tutor to help check for stray light and test the safelight before using another full sheet.

Return to the same frame over the first month

On your next visit, use your notes to repeat the first print. Then try a different contrast filter with variable-contrast paper and make a fresh exposure test. Compare the dry prints side by side. Which one still shows the folds in that dark coat?

Once you can repeat a print, try changing just one area. For example, give a pale sky extra exposure while shielding the foreground with card. This is called burning in. Keep the original print beside the new one to judge the sky and the edge of the foreground. You can do the bench work alone, then take both versions to a club print night and ask which detail catches people’s attention first.

Darkroom printing guides